Ink Giant DTF Printers With Advanced 8 Colour Inkset

DTF Heat Transfer Logos For Garments & Fabric

Ink Giant DTF print systems have a proven track record for printing high quality, wash-fast heat transfers for garments and fabrics.

The DTF process is mostly automated and so it is much faster than regular print & cut vinyl heat transfers keeping production costs to the minimum.

It's faster because there is very little work to do other than load a new image and setup the number of repeats required then start printing.    There's no need for cut lines in the artwork because DTF prints don't need to be contour cut.     

You probably guessed the next part . . . . . if there's no cutting then there's no weeding either and that alone is a massive time saver.

Last but not least, there's no need for a transfer film.  The logos you get from the DTF print system are full-colour, heat-press-ready.  They also stretch very well and have excellent wash-ability.

Printer System Spec's

This compact DTF print system provides Ink Giant's advanced colour ink-set including Cyan, Magenta, Yellow, Black, Red, Orange, Green & Blue inks for unsurpassed colour reproduction

• Three Epson i3200 print heads.
• 40 cm film width
• European SAI Flexi RIP software with powerful new tools
  #  Save ink cost with total white ink cover control
  #  Reduce white ink when printed under black
  #  Choke white under colour but not white only text
  #  Apply soft print effect - apply tiny holes to large areas of print for a softer finish
• Excellent colour output especially on those colours that can be difficult or even impossible using a CMYK printer 
• Automatic white ink stirring, circulation and filtration system
• Heated vacuum bed to hold film down during printing
• NEW - Power driven film feed for even film tension
• NEW - Automated head cleaning, head cap cleaning and head moisturising system
• Automatic application of adhesive powder with auto-powder recycling system
• Vacuum conveyor film feeding
• Portable air filtration system
• Automatic printed film re-wind system

60cm, DTF Print system spec's

PRINTER

• Available with 3, or 6 Epson i3200 print heads / 8 colours. C,M,Y,K,Or,R,Bl,Gr,W
• 70 cm print width (Actual print width limited by film)
• European made SAI Flexi RIP software with powerful new tools (See 40cm for details)
• Automatic white ink stirring, circulation and filtration system
• Automated print head and capping station cleaning
• Automated head poisturising
• Heated printer beds for rapid ink drying without bleed
• NEW - Holiday mode. Automatic head cleaning during periods of non-use, weekend s and holidays
• NEW - Automated flushing and cleaning of head caps and ink pumps for even better performance and reliability

SHAKER / HEAT TUNNEL

• Heated plate at entry to adhesive powder applicator
• Advanced automatic application of adhesive powder
• Automatic recycling of powder
• Beater  bar - removes powder from un-printed areas of film
• Powder saver bar keeps powder in the film loop for much longer
• Conveyor film feed with vacuum bed
• Heat finishing tunnel with top heat
• Auto rewind of printed film
• In-built smoke filter & portable smoke filter.