White toner printers

 

Now You Can Print Full Colour Images Including White Only Areas For Garments, Paper, Cardboard & Hard Surfaces - Without The Need For Pre-Treatment, Contour cutting Or Weeding

With one of our OKI Pro laser printers and Forever printable laser transfer media you can do exactly that.    Imagine being able to print around 150 logos of 90mm x 90mm in about 1 minute.   That's impressive - but let's not forget the printed sheets have to be heat pressed with a B sheet and then the logos have to be applied to the garment as well. 

Here's the part that everyone is totally sold on . . . . . the logos don't need to be contour cut or weeded.   If you've ever made vinyl logos before then you'll understand what a MASSIVE time saver that is.

What's more - OKI Forever logos can be applied to a wide range of fabric types and colours - including dark polyesters. You can even print 1 colour images / logos with neon colours or with Gold or Silver.

Need to print logos for non-textiles?     No problem!   There are Forever laser printable sheets that can be used on paper, cardboard, book covers, leather and many hard surface products too.   There's even a special Forever products for printed logos that can be applied to candles or soap!

 

Embroidery Source - Authorised sales and service centre for OKI Pro series laser printers

OKI and Forever have brought about a revolution in garment and promotional product printing.  You see OKI's white toner printer allowed for the first time,  multi-colour laser prints including areas of white only print.   Then came Forever's excellent transfer media that eliminated the requirement for weeding.   That's right - no weeding even on the most complex images.

After extensive tesing we found that the best solution for use with the OKI machine is the range of high quality Forever transfer papers and foils made by Forever in Germany.   These new generation laser transfer products have made it so much easier to produce and apply full colour prints to a range of products.  When used in conjunction with the fantastic Forever Transfer RIP software prints use less toner, feel softer and last much longer in the wash.

 

Step 1 - Pressing and separating A & B sheets

Step 2 - Applying the printed logos to garments

 

Here's what you need to make your own laser printed logos :

  • An OKI Pro A4 or A3 laser printer
  • Forever Transfer RIP software for white toner
  • A good quality heat press - we strongly recommend a swing away press for best results
  • Forever - laser printable sheets + B sheets

Please note:  Laser Dark and FlexSoft sheets must be used together with a B sheet (adhesive).   MultiTrans and water slide do not need a B sheet.

 

Different types of Forever printable media:

  • Forever Laser Dark - used for full colour logos on fabric
  • Forever FlexSoft - for single colour logos on fabric in neon or metallic colours
  • MultiTrans - used for full colour logos for hard surface items. Also available in Gold or Silver
  • MultiTrans select - Gold & Silver logos on paper, card, book covers Etc
  • Water slide - full colour logos for soft surface products.

 

Tip:   FlexSoft single colour transfer sheets can be printed with a standard Black only laser printer to produce any of the 18 different FlexSoft colours.   However, in our opinion FlexSoft white and neon colours work much better when printed with white toner.  

To see the full range of FlexSoft colours in our web store......  Click here

 

 

 

10 Item(s)

per page

10 Item(s)

per page